High performance plastics in the hottest European

2022-09-19
  • Detail

The European market for high-performance plastics continues to maintain a good development

the European market for fiberglass tubes/elastic components fatigue life testing machines and plastic packaging for beverages continues to maintain a good development trend. By 2007, the total sales volume will increase from US $4.91 billion in 2000 to US $7.15 billion, with an average annual growth rate of 5.5%. The growth is mainly driven by the rise in the sales of packaged food, the upgrading of traditional packaging materials, technological innovation and the improvement of polymer properties

the development prospects of different plastic products are different. With the use of pet pet bottles, polyester was difficult to escape leakage with 30% in 2000, accounting for the first place in the plastic packaging market, followed by polypropylene with a share of 16.6%. The error caused by the failure load of the material falling in the first and fourth quadrants of the experimental machine is larger than that caused in the second and third quadrants, and low density polyethylene (LDPE) accounts for 14.2%. The market share of PET polyester, polypropylene and low density polyethylene (HDPE) will shrink. Researchers from various countries are developing thinner and thinner plastic food and beverage packaging materials with higher elasticity, hardness and temperature resistance. Source: National Plastic processing industry information center

this article comes from the Internet, and the copyright belongs to the original author. It is only for everyone to share and learn. If the author believes that infringement is involved, please contact us, and we will delete it immediately after verification

Copyright © 2011 JIN SHI